2" ROLLER THIS IS THE STANDARD SIZED ROLLER USED IN OVER 99% OF ALL GARAGE DOORS

GREAT product, easy to replace myself. THANKS !!!! Best upgrade I did.
ACTUAL CUSTOMER FEED BACK ON THIS ITEM!

SEE ALL OUR FEEDBACK !
 

10 ROLLERS

FAST & FREE SHIPPING

NOT ALL ROLLERS ARE CREATED EQUAL

13 BALL BEARING

SEALED BEARING

THIS ROLLER IS PRESSED TOGETHER, NOT PEENED

ROLLER HAS A LUBRICATION GROOVE TO DISPERSE LUBRICATION OVER A LONG PERIOD OF TIME
RESULTING IN LESS AND INFREQUENT LUBRICATION REQUIRED

4-5/8" OVERALL
4-1/8" SHAFT
1/2" SHOULDER
7/16" SHAFT THICKNESS
1/2" WHEEL THICKNESS
1-13/16" WHEEL DIA.

TYPICALLY REFERRED TO AS A 2" ROLLER THIS IS THE STANDARD SIZED ROLLER USED IN OVER 99% OF ALL GARAGE DOORS

THIS HEAVY DUTY, SEALED, 13 BALL BEARING ROLLER WILL REDUCE DOOR NOISE BY OVER 75%,
YOU SIMPLY WILL NOT BELIEVE HOW QUIET YOUR DOOR IS USING THESE ROLLERS.
THE LUBRICATION CHANNEL WILL CONTINUOUSLY DISPERSE LUBRICATION TO THE
ROLLER AND TRACK, ONCE A YEAR LUBRICATION WILL BE SUFFICIENT WITH
THIS ROLLER.
 BEING A SEALED ROLLER, DIRT AND DEBRIS ARE KEPT OUT OF THE BEARINGS
UNLIKE A TYPICAL ROLLER AND THAT GREATLY INCREASES BEARING LIFE
THIS ROLLER IS PRESSED TOGETHER TO CLOSE TOLERANCES, MOST
ROLLERS ARE PEENED, THAT LEAVES VARIABLE DEGREES OF PLAY AND THAT RESULTS IN WEAR.
 ROLLER IS RATED @ 125 LBS PER ROLLER AND HAS BEEN TESTED
TO WITHSTAND OVER 25K CYCLES ON 12' TALL DOOR WEIGHING 1400 POUNDS.
TYPICAL RESIDENTIAL DOORS ARE 7-8' TALL AND WEIGH LESS THAN 300 LBS


SIMPLY PUT, THIS IS THE PREMIER ROLLER ON THE MARKET.

THIS ROLLER:
WILL QUIET THE DOOR TO AN UNBELIEVABLE DEGREE
WILL LAST LONGER THAN THE DOOR ITSELF
REQUIRES LESS LUBRICATION
WILL BE THE LAST ROLLER YOU REPLACE!

USE REGULAR MOTOR OIL IN A DISPENSER FOR LUBRICATION

LUBRICATE THE OUTSIDE ROLLER WHEEL AND THE DOOR TRACK
ROLLER BEARINGS ARE SEALED AND NEED NO LUBRICATION

We are Garage Door Professionals
There are many,many products out there that are just not up to standards.
We strive to bring the absolute best Garage Door Products to our customers.

We use these rollers in the field on large commercial doors and all residential doors.
Again, there is not a better roller on market.

We offer many different roller options IN OUR STORE UNDER
ROLLERS, CLICK THE STORE LINK BELOW
WWW.LOETC.COM

We offer this roller in:
10 PACKS
12 PACKS
100 PACKS
INDIVIDUALLY WITH A FLAT SHIPPING RATE

Heavy duty sliding gate wheelsWheels, Pulleys, Travel Stops

Wheels, Pulleys, Travel Stops

Double Bearing Wheels with Lubricator Pin

Heavy duty sliding gate wheels, preset for lubricator pins to suit 40mm to 100mm RHS, 100mm to 250mm diameter, up to 700kg per wheel, O, U, V groove.

Heavy Duty Wheels With Rocker

Heavy duty sliding gate wheels with weldable central rocker and lubricator pins, 160mm to 250mm diameter, up to 1800kg per wheel, O, U, or V groove.

Height Adjustable Wheel With Support

Double bearing sliding gate wheel with height adjustable support, to bolt or weld, 120mm diameter, up to 350kg per wheel, O groove

Nylon Pulleys

Nylon pulleys with bearing, 80mm to 120mm diameter, for 12mm or 15mm round bar, 6mm groove

Nylon Wheels

Nylon sliding door wheels with bearing, 50mm diameter O groove for 12mm round track, 60mm diameter V groove with M10 bolt and bushings, up to 55kg per wheel.

 Pulleys For Truck Ribs

Steel pulleys for truck ribs, 50mm to 60mm diameter without bearing, 50mm to 80mm diameter with bearing, bolt and bushings, 10mm O groove.

 Sliding Gate Wheels - Bolt Through

Single or double bearing sliding gate wheels to bolt through 30mm to 50mm RHS. 50mm to 200mm diameter, up to 500kg per wheel, O, U, or V groove.

 Steel Pulleys

Steel pulleys for ropes, 60mm to 120mm diameter, for 17mm round bar without bushings, or with seperately supplied bushings for 12mm and 15mm round bar.

Travel Stops

Rubber travel stops for sliding gates, to bolt directly to steel posts, or with fixing plate to bolt down or weld on, 30mm to 50mm diameter.

Wheels With Closed Support

Single or double bearing sliding gate wheels with closed support, to weld or bolt, 50mm to 100mm diameter, up to 300kg per wheel, O, V groove.

Wheels With Outer Support

Single or double bearing sliding gate wheels with weldable support for 30mm to 50mm RHS. 80mm to 140mm diameter, up to 400kg per wheel, O, U, or V groove.

Wheels With Vulcanised Rubber Coating

Single or double bearing vulcanised rubber coated wheels, with or without support, 90mm to 120mm diameter, up to 210kg per wheel, O groove.

Wheels With Welded Support

Single or double bearing sliding gate wheels with welded support, to bolt or weld, 80mm to 120mm diameter, up to 320kg per wheel, O, U, or V groove.

Wheels With Welded Support And Lubricator

Double bearing sliding gate wheels with welded support and lubricator pin, 160mm to 200mm diameter, up to 600kg per wheel, O, U, or V groove.

Sheaves for Sliding Doors in Brass and Nylon

Made in china !
Sheaves intended for underneath support of single, bi-parting and by-passing sliding doors.
Three different sizes available to cover the widest range of applications.
Screws are included.
Sheave 20
Recommended for store fixtures, case goods, wardrobe, kitchen cabinets and similar.
For 3/4" minimum door thickness.
For 50 lbs. doors.
Available with brass or nylon wheels and brass or steel housings.
Sheave 18
For 1" minimum door thickness.
For 125 lbs. doors.
Self-lubricating nylon wheel for quiet, easy rolling.
Sheave 14
For 1-1/4" doors.
For 200 lbs. doors.
Self-lubricating nylon wheel for quiet, easy rolling.

ye@loetc.com you can add me wechat: +8618869942520 my whatsapp+8613173891570 my Skype: longyouopen

sliding gate wheel ,sliding gate roller,sliding door roller,sliding door wheel.sliding door pulley,sliding gate pulley.sliding door conponent kits,sliding door accessories,12 dust pan ,16 dust pan,steel dustpan,nylon wheel,sliding door track,sliding door track roller.industrial gate hardware,sliding gate plus.

industrial sliding doors$hanging sliding systerms and industrial sliding doors$hanger slilding systerms and industrial door assembly production line

 roller material:steel NO.45. surface treatment:color zinc. widely used in the industry door. we are a manufacturer of sliding door roller. 

Longyou WeiTe Electromechanical Technology Co.,Ltd. was established in 2002,which is a professional manufacturer of various parts for industrial doors in China. Our company has insisted on the objective of technological development and incessant innovation in the past several years .Our products aiming up to the international standard, have achieved a reputation both at home and aboard market,such as the Europe$the America$the Mid.East area$the Southeast Asia etc.Due to continuous and stable development,our company has enlarged its scale and owned the more advanced equipment.We manufacture not only standard products but also produce according to customers'drawing or samples and with customers' private lable(OEM service). Our leading products include hanger pulley$sliding door pulley$upper rail$rail fixing$door hemming$stainless steel handle and other parts for industrial sliding doors$hanging sliding systerms and industrial sliding doors$hanger slilding systerms and industrial door assembly production line. We sincerely hope that our high quality products and superior service will help to establish business reliable relationship for a long time with all of our present and future customers.

specializes in manufacturing gate, door, windows and fence’s accessories hardware

 ye@loetc.com you can add me wechat: +8618869942520 my whatsapp+8613173891570 my Skype: longyouopen

sliding gate wheel ,sliding gate roller,sliding door roller,sliding door wheel.sliding door pulley,sliding gate pulley.sliding door conponent kits,sliding door accessories,12 dust pan ,16 dust pan,steel dustpan,nylon wheel,sliding door track,sliding door track roller.industrial gate hardware,sliding gate plus.

specializes in manufacturing gate, door, windows and fence’s accessories hardware which is used for sliding gate, swing gate, sliding cantilever gate, sliding door, folding door and electric retractable door, fence, farm etc.

We specialize in manufacturing:  1. Sliding Gate Wheel, Track,  2. Cantilever Gate Wheel, Channel, Gate Stopper, Guide Roller Bracket, 3. Hanger Roller, 4. Nylon Roller, Steel Bracket with Nylon Roller  5. Gate Latch; 6. Gate Hinge, Welding Hinges